Your brakes are responsible for keeping your car under control, so it’sessential to keep an eye on them. If you find yourself pushing down more complex and longer than usual on the pedal or if your brakes are making grinding noises, there may be a problem.
Fixing minor issues with your brakes can be easy and affordable; all you need is genuine parts from Kor Pak. When you wait for more extensive problems, it could mean that you need an entire replacement.
Below are indicative signs that your brakes need replacing:
- Low pedal
Your brakes should be easy to push down. If the force required to depress them begins to feel more significant than usual, it may mean your brake pads are wearing thin and need replacing. Your instructor will talk about checking your brake fluid levels at the end of lessons, but if you notice that you have to press very hard on the pedal,it’s time to be proactive.
- Pulling or dragging
You might feel the brakes pulling your car in one direction when you apply them, particularly if it is braking excessively on one side of your vehicle. It could indicate that your pads are wearing unevenly and need replacing.
- Grinding noises
Grinding sounds mean that parts of your brake system are worn out and should be replaced as soon as possible to ensure they don’t cause a more severe accident.
- Vibrations or noises from the braking system
Any odd vibrations or noises from your brakes may indicate that one of the components needs replacing, such as a drum, rotor, caliper, or pads. The first thing you should do is to take it to your mechanic for a complete diagnosis.
- Brake fluid leaking
Check your brake fluid levels regularly to make sure they are within the correct range. Do not ignore burning smells or leaks, which indicate something more severe than just worn-out pads or shoes. The most common cause of brake fluid leaks is bad seals, which you can get replaced with genuine parts.
- Worn out shoes or pads
The brake shoes and pads are the most critical part of your braking system. When they become worn out, it can lead to premature failure of other components. They should be replaced in pairs and using original equipment manufacturer (OEM) parts.
- Worn out drum or rotor
The brake drums and rotors create the friction needed for your brakes to work, but they wear down over time. If a worn-out rotor starts dragging on a new set of shoes, it can cause them to wear prematurely. If you notice that your car pulls to one side when you brake, it might mean that your rotor is worn.
- Thin or warped rotors
The drums and rotors might be warped if they are too thin, causing the pads to wear excessively on one side. Worn-out rotors can also lead to premature pad wear because of uneven braking surfaces. If this occurs, you will need to have your rotor machined or replaced.
Final Thoughts
Your brakes are critical to your safety when driving, so paying attention to them and scheduling regular maintenance checks is essential. If you need brake repair or replacement, look for genuine parts from reputable manufacturers and suppliers.
